Many landlords require low voltage cabling such as Ethernet inside the wall cavity or floor channel to be run in conduit.  When planning cable runs, consult with your IT department and cabling contractor to determine the number of wires that will be run to each destination.  Be certain the architect is aware of the number of cables so the plans reflect the proper sized conduit.

In a typical office environment, we generally recommend a minimum of three (3) cables per destination (1-phone, 1-computer, 1-peripheral).  Although some VoIP telephones accept direct computer connection freeing up a cable, the additional wire can still be used for a peripheral or spare/backup. It costs less to run the cable during construction than installing cable once the walls and ceilings are closed up.

Ensure the architect specifies a note indicating conduit should have a drag line allowing for easy cable pulls for your cabling contractor.

Recommended conduit sizing for Cat6 cables are:

(3) Cables  –  1/2″ Conduit
(5) Cables  –  3/4″ Conduit
(8) Cables  –  1″ Conduit
(14) Cables  –  1- 1/4″ Conduit
(19) Cables  –  1- 1/2″ Conduit
(32) Cables  –  2″ Conduit

Use this as a sizing guide for other types of cable such as VGA, HDMI and audio.

About these ads